Structured Data Cabling
ADVANT offers the products and services to design, deliver, install and maintain both Copper and Fiber Optic structured cabling systems. We have a team of very experienced project managers that take care of all stages of the project, from planning according to the needs of the customer to the final stages of testing and providing network documentation. ADVANT is equipped with state-of-the-art testing equipment for completing installations and performing accurate measurements of Structured Cabling.
Based on numerous references we are able to install high quality structured cabling system and provide 25-years system warranty for several vendors. Our installers are trained to the highest standards. ADVANT is a certified partner (copper and fiber optic) by the world’s leading manufacturers LEVITON BrandRex, COMMSOPE SYSTIMAX Solutions and FiberFab (recently rebranded to AFL Hyperscale).
In terms of safety a new CPR compliance applies higher product safety standards to save lives and protect buildings in a fire. We’re ready for CPR. We can help you understand what it means for your upcoming projects, and can provide the CPR-approved cable you need for any region.
For cabling, CPR introduces new fire safety classifications and requires that all cables marketed in European Economic Area (EEA) to carry a CE mark and have a declaration of performance (DOP). The CE mark indicates the specific fire performance level that the cable has been verified to provide.
Starting 1 July 2017, manufacturers cannot supply cables unless they have been tested, certified, and marked in accordance with the CPR standards. We’re dedicated to meeting regional CPR requirements.
In the past, cable systems were built depending on the manufacturer and type of communication devices or information protocol. They allowed users to operate IT systems (data network, telecommunications, control systems, etc.) on a cable system that was upgraded for several times. Depending on the type of upgrades, over time, many different types of wiring and connections appear in the cable system, resulting in lack of clarity, incompatibilities, confusion and unsolvable problems in the transition to more sophisticated communications technologies dictated by the development of IT and telecommunications.
The answer to these problems is offered in the standardization of all the building blocks that make up information communication systems. The construction and testing of cable infrastructure for a single campus or group of combined facilities (Campus) is prescribed by international standards (ISO 11801, EIA / TIA 568, EN 50173, IEEE 802.3, ATM Forum…) that set requirements for a modern communications system:
- A cable system independent of the application.
- Compliance of all components of a cable system.
- System design capability before specific user requirements are known.
- Simple and economical modification of the system design and adaptation of the system to the specific requirements of the user.
- Development of future applications based on support for modern applications.
At the passive equipment level, the standard prescribes cable infrastructure in the form of a structured universal cable system. The topology of the structured cable system is implemented in the form of a star and offers the user high flexibility and usability for various applications (data transmissions, telecommunications, control systems, video and more).
As a rule, the cable subsystem of backbone connections between buildings runs from the central node to the main communication nodes of the individual sites. Fiber optic cables and multi-pair telecommunication cables for outdoor installation are used for interconnections.
The cable subsystem of backbone connections in a building connects the communication nodes of the individual floors to the main communication node of the building. The connections between the node panels are usually made with fiber optic cables and copper twisted pair cables (Cat8, Cat7 or Cat6A) and multi-pair telecommunication cables.
The horizontal cable subsystem connects workplace outlets to the panels in the communication rakcs. Copper cables with twisted pairs are used, which are terminated on panels and outlets and form a communication network. The floor communication node represents the accessible level of the IT network at which users enter the network. Higher data rates require higher category copper cables (Cat 8, Cat7, Cat6A, Cat6) or fiber optic cables.
MORE FROM OUR OFFER: #Cabling

The offer includes:
- Design
- Construction
- Maintenance
Have a question? Contact us.
Advant d.o.o.
Ljubljana, Cesta na Brdo 119A, Slovenia
Phone: +386 1 470 00 00
Fax: +386 1 470 00 10
E-mail: info@advant.si
Optimizirajte si delovanje podatkovnega centera
LATEST NEWS: #Cabling
Novost! NESITE Okolju prijazen dvignjen pod zdaj na voljo pri podjetju Advant!
25.08.2023
Veseli nas, da vam lahko predstavimo blagovno znamko Nesite, ki je ena izmed vodilnih na področju okolju prijaznih talnih oblog. Nesite uporablja za proizvodnjo njihovih izdelkov reciklirane in reciklabilne materiale. Njihovi izdelki so skladni s…
Predstavljamo vam najmanjši in najlažji litij-ionski UPS 5kW — APC Smart-UPS™ Ultra
03.12.2022
Predstavljamo vam najmanjši in najlažji litij-ionski UPS 5kW — APC Smart-UPS™ Ultra Predstavljamo vam najmanjši in najlažji litij-ionski UPS 5kW — APC Smart-UPS™ Ultra Najbolj priljubljen UPS na svetu je zdaj na voljo z izboljšano življenjsko dobo…
Datacenter konferenca 2022
01.08.2022
Na spodnji povezavi si lahko ogledate Posnetek Datacenter konference 2022, kjer smo, kot zlati sponzor konference predstavili novosti na področjih infrastrukture podatkovnih centrov in izvedli dva odlično obiskana predavanja.
Snapshots from the Datacenter Conference 2022!
15.06.2022
Snapshots from the Datacenter Conference 2022, that took place on June 8th at the Ljubljana Exhibition and Convention Center.…
Utrinki iz datacenter konference 2022!
15.06.2022
Utrinki iz Datacenter konference 2022, ki je potekala 8.6.2022 na Gospodarskem razstavišču v Ljubljani.…
Schneider Electric Uniflair hlajenje podatkovnih centrov
09.06.2022
Do bolj trajnostnih podatkovnih centrov z inovacijo hlajenja Schneider Electric Uniflair Modularna zasnova omogoča enostavno in preprosto namestitev v podatkovne centre Nova rešitev Uniflair™ Chillers zagotavlja energetsko učinkovito hlajenje z…
SLIM PRIKLJUČNI KABLI UTP/FTP
31.05.2022
Vaša mrežna omara ne rabi izgledati tako! Zagotovite popoln nadzor s SLIM povezovalnimi kabli SLIM povezovalne vrvice imajo prirojeno večjo prilagodljivost kot običajne vrvice. Ni samo vitek in prilagodljiv, ampak tudi močan. Zagotavlja hiter…
Kaj morate vedeti o podatkovnih centrih?
31.05.2022
PODATKOVNI CENTRI BREZ UČINKOVITEGA HLAJENJA JE RECEPT ZA KATASTROFO Podatkovni centri postajajo vse pomembnejši del infrastrukture podjetij. So element, pri katerem je izrednega pomena, da vse deluje tako, kot mora, brez izpadov ali celo…
Data Center Konferenca 2022
24.05.2022
ADVANT d.o.o. na konferenci DATA CENTER 2022 Pozdravljeni! V organizaciji podjetja Palsit d.o.o. pripravljamo 8. junija 2022 , konferenco DATA CENTER 2022 (Ljubljana, Gospodarsko razstavišče). Sodobna poslovna konferenca o računalniških centrih bo…
Zaposlimo tehnika hladilnih sistemov in klimatizacije (m/ž)
16.03.2022
Želite delati v prijetnem, stabilnem in urejenem delovnem okolju ter biti del ekipe, ki spodbuja inovativnost in je odprta za vaša mnenja in ideje? Pri nas boste kot član tehnične podpore, lahko nadgrajevali svoje znanje, se dodatno strokovno…